On a basic single-pole switch, there are two brass terminals for the hot and “switch leg” ... Use appropriately-sized wire nuts or Wagos to connect these to your house wiring.

Next, refer to the switch-wiring photo you took earlier to connect the existing wires to the new switch. Here’s how a single-pole switch is typically wired: The electrical box usually has two ...

Next, remove the screws that attach the bare switch plate to the electrical box in the wall. At this stage, it’s also useful to pull the switch as far out from the wall as the wiring will allow to get ...

The Eve Dimmer Switch won’t work for everyone, but if you have the proper wiring and the right smart home gear, it’s the ...

In this how-to, we’ll replace a single-pole switch with a C by GE Start Smart Switch Motion Sensing+Dimmer, but the process isn’t radically different for a multi-way circuit.(And if you don ...

This switch gives us on and off. Power comes in one terminal, and whether it leaves on the other depends on whether the switch is in the on or off position. A two-pole (or double-pole) switch is two ...

If more than one switch controls that load—switches on opposite sides of a room, for example—then you’ll need to replace it with a multi-pole (aka 3-way) smart switch.

single pole double throw (SPDT) switch connects one input to one of two outputs allows switching between two circuits, unlike SPST version which only connects/disconnects one circuit ...