Putting crimp connectors on wires is one of the most tedious things you’ll do. It’s not easy, either, unless you have some practice. Before you start digging in to a pile of connectors,… ...

Replacing a broken taillight on my trailer reminded me of just how much I like solder seal butt connectors.Before I starting using them, I was always leery of using traditional crimp connectors ...

There are many options when you need to splice wires. In addition to formal two-piece connectors, there’s the widely used ...

Soldering crimp connectors is a recipe for disaster, you are manufacturing nasty stress points and the wire will just snap right off. Been there done that. Get the right tool.

For a crimp that’s strong, the wire diameter must match the connector using the AWG (American Wire Gauge) standard. The wire size is marked on the spool and the insulation. To make matchups easy, the ...

Squeeze the handles together to crimp the connector onto the wire. Step 6: The most magical feature of a multi-tool crimper and stripper are the threaded screw holes found in the middle of the tool.

Slide the seal over the wire insulation with the more slender collar toward the bitter end, where it will be crimped in place. The DL 090 pins require a two-step crimp on the bare wire using a 1.25 mm ...

Wires can wear out or get damaged from rodents or corrosion, so it’s common to need to splice them from time to time. You ...

ROCKFORD, Ill. (August 3, 2020) – Electrical workers searching for versatility with a multi-functional tool to cut wire, crimp connectors and punch electrical panels now have a practical option ...

I like the Posi-Lock connectors so much, I decided to get a bunch of them in different sizes so that I’d have them when I needed them. They come in sizes to fit anything from a 6 gauge to 24 gauge ...