15 thoughts on “ Arduino Analog I/O Multiplexer ” frankbuss says: June 9, 2018 at 1:43 am The datasheet of the ADG732 says that the address pins are level sensitive. So you don ...

The long-awaited Arduino Due just hit the market, replacing the 8-bit, 16 MHz brain of the popular Uno microcontroller prototyping platform with a 32-bit, 84 MHz processor, while augmenting inputs ...

One of the great things about the Arduino environment is that it covers a wide variety of hardware with a common interface. Importantly, this isn’t just about language, but also about abstrac… ...

The Arduino UNO R4, featuring the Renesas RA4M1 (Arm Cortex-M4) running at 48MHz, boasts a 3x performance increase over the UNO R3. Additionally, SRAM has been upgraded from 2kB to 32kB, and flash ...

The product family’s key features include: Supply voltage range: 7-18 V, for transients 4.5-40 V; BTM901X min current limit: 10 A, 5.2 A for 1 sec @ 85°CBTM902X min current limit: 20 A, 8.8 A ...

It features the same ATmega328 processor that the Arduino Uno uses, ... Teensy 2.0 is roughly the size of a quarter, with 25 I/O pins, and Teensy++ 2.0 is only slightly larger.

On-board jumpers allow the transmitter and receiver to be connected to a choice of Arduino I/O pins – default is Tx is connected to UART Serial pin 1 and Rx to UART Serial pin 0. The associated ...