The flood coat technology pertains to formulated resin systems, specifically two-part polyurethane resins, used for flood ...

So, I installed a new DC power jack on a laptop motherboard. Being the genius I am, I thought I would add a little epoxy around the jack on the top of the board to ensure it stayed put and didn't ...

Surprisingly, alignment isn’t critical. The epoxy dries and then the circuit board is taken to a, “semi-automatic thermosonic wire bonding machine,” and slotted into a fixture at its base.

Got an old metal utility ironing board doing nothing but holding loads of laundry? Quickly convert it into a clever outdoor potting station with this easy DIY.

Rather than replace the entire board, [Happymacer] carefully removed the carbonized (and therefore conductive) fiberglass and resin, leaving a gaping hole in the board.

A bare chip that is mounted directly onto the printed circuit board (PCB). After the wires are attached, a glob of epoxy or plastic is used to cover the chip and its connections. The tape ...

I made a DIY epoxy inlaid cutting/serving board with steel metal handles using a cut-off from a reclaimed wood pin oak slab. This board features cutouts for two whiskey (or tea) glasses and three ...