A helper or a set of alligator clips will make the job much easier. Check out the VGA pinout at pinouts.ru and the component to VGA adapter pinout at the VGA over Cat5 writeup. (We've simply used ...

I'm looking to connect my laptop which has a VGA output to my TV which has HDMI and Component. Ideally, I'm looking for a VGA(RGB-HV) to component(YPbPr) solution. I ...

you must use a VGA connector to output the video signal. If you have another device that connects through an RGB component cable and want to connect it to the VGA netbook, use an all-in-one cable ...

If component is accepted, the signals go in to pins 1 (Pr), 2 (Y), and 3 (Pb), with the grounds going to pins 6, 7 and 8, respectively; this, fortunately, corresponds to the pinout for red, green and ...

VGA cables carry the video and sync signals via a 15-pin configuration. Matching this is a 15-pin port on the projector. Pins 1-3 correspond to red, blue and green component video signals ...

It has VGA out. My TV is a Panasonic HDTV CRT that supports 720p, but has no digital inputs (Component is the best it has). Off amazon I purchased an InFocus VGA to Component Adapter thinking it ...

In a world where standards come and go with alarming speed, there’s something comforting about VGA. It’s the least common denominator of video standards, and seeing that chunky DB15 connector ...

The RGB signals from the VGA connector are fed to three BNC connectors via AC ... synchronisation problems when the display is extremely bright, with a maximum green component. In this case the value ...

Old-school Macintosh-to-VGA adapter. Just solve for X, set the right DIP switches and you’re golden. If you’re the happy owner of a vintage Apple system like a 1989 Macintosh IIci you may know ...