Make a hammering block from a one-foot piece of scrap lumber. Place the groove over the tongue edge of stubborn pieces and hammer on this block. This avoids damaging the actual piece of ceiling wood.

Most shiplap and tongue and groove planks are wood. If you plan to paint the finished paneling, you’ll save money by using inexpensive pine planks or MDF, both of which are available primed.

I ordered 400 square feet of tongue-and-groove yellow pine in 8-inch-wide, 1-inch-thick planks. Today, wood flooring is normally 3⁄4-inch thick or less—because it’s usually laid over a ...

7. To start another row, push the groove into the tongue of the first row and tap into place with a tapping block. Stagger the joists 6-inches apart and nail into place at the end of the row. 8.

The Tongue and Groove Cladding from Sculptform is a versatile cladding system available in a range of timber species and board profiles. This system can be used for interior and exterior ...

Make a hammering block from a one-foot piece of scrap lumber. Place the groove over the tongue edge of stubborn pieces and hammer on this block. This avoids damaging the actual piece of ceiling wood.