The TDDCDC-TPH-IN-BI-LLC-300W-RD design uses TP65H150G4PS 150 mOhm SuperGaN® FETs in a robust TO-220 package to power a high performing, high efficiency energy harvesting and distribution battery ...

Power Integrations and SnapMagic collaborate to advance power supply design automation; PSU specification to PCB layout in minutes using PI Expert.

But it’s also rated for more powah: The 28-pin connection is rated for up to 900 watts, presumably delivered by multiple rear-mounted power supply cables. Multiple competing standards are always ...

Remote patient monitors (RPMs) are continuously evolving to include more features that enable doctors to gain greater insights into their patients’ health. These features create greater demands on the ...

One of the most important concepts for anyone using power supplies is understanding constant voltage (CV) and constant current (CC). For engineers getting started with power supplies they must know ...

Intel’s ATX 3.0 Power Supply Design Guide isn’t the company dictating to power supply companies what to make; they’re recommended guidelines put together with input from other companies with ...

When reaching for a power supply design it’s normal here in 2022 to reach for a switching design. They’re lightweight, very efficient, and often available off-the-shelf at reasonable prices.

This article series is in the Power Management topic within our Series Library and the Power Supply Design topic within our TechXchange Library Members can download this three-part mini tutorial ...

The supply transformer and backup UPS must be rated at 200 A × 400 V = 80 kVA. But if the power factor of the loads is only 0.6, then only 80 kVA × 0.6 = 48 kVA of real power are being consumed.

Two terms that need be defined first are peak power and continuous power. Peak power is the maximum instantaneous audio power. It will determine how much power to design for the supply to physically ...

Intel's new design guidelines require manufacturers to increase their power supply efficiency from less than 50 percent to 60 percent, when the supply units are dealing with a light, 20 percent load.