The first word in lockout/tagout is “lock” but correct application of locks often remains a mystery to those conducting ... But if it's a subpanel, you can probably lock out its supply breaker. In the ...

Lockout/tagout was one of the first ... to be either authorized or affected that the bus tie breaker had been returned to service. Locks, tags, and signage were in place from all parties except ...

He grabbed his tools, along with his locks and tags, and walked up to the roof to shut down the exhaust fan. He read the existing lockout/tagout (LOTO) procedure, which referenced the correct 480V ...

A comprehensive lockout/tagout (LOTO) program not only helps to ... supporting this required transition from “tags only” to “locks and/or tags-plus”. In 1989, OSHA implemented 29 CFR ...

Open the breaker. Hang your lock ... the person in charge of the operation or project has overall responsibility. With a simple lockout/tagout, you remove your locks and tags and re-energize the ...

Steps designating the safe placement and transfer of the lockout/tagout devices and the authorized employees who have the responsibility for them. Specific requirements for testing equipment to verify ...

OSHA’s standard for the control of hazardous energy is commonly known as “lockout-tagout” because the fundamental method of ensuring safety during maintenance is using locks and tags to ...

To improve overall employee safety across plants and facilities, leaders at Southern Company Generation decided to switch from a tagout-based safety program to a lockout-tagout (LOTO) program.

The machine is under active service or maintenance and in a Lockout/Tagout status ... okay before using equipment • Verify Lockout/Tagout locks and tags are removed before attempting to ...

He followed the equipment-specific lockout/tagout procedure, applied his personal locks to each isolation point and even ensured all the residual energy was dissipated before the service work began.

Lockout/tagout was one of the first ... to be either authorized or affected that the bus tie breaker had been returned to service. Locks, tags, and signage were in place from all parties except ...

These equipment locks are not to be used as a substitute for the employee’s safety lock when he/she is actively working on the equipment. D. It is important to note that only one key will be issued ...