Follow along to see how we replaced the cylinder head gasket in a 134-cube Willys ... tools and does a great job at removing paint, gasket material, and other gunk. Don't forget to clean any ...

Head gasket leaks are inevitable as they resist changing temperatures, vibrations, pressure changes, and material flexing ... a head gasket leak between the cylinder and the engine's outside ...

With the head placed on its exhaust ports, we began removing material from ... matching the head gasket with the bolt and dowel-pin holes in order to scribe a cylinder-bore line around the chambers.

Instead it had the necessary angles cut into the cast-iron material ... can be as little as a gasket match that forms a radius at the joining area of the cylinder head port and intake manifold ...

The head gasket is a piece of thin material with a lot of holes in it ... They don't have engine blocks, cylinder heads or head gaskets mating the two. Problem solved.

Blown head gaskets are often signs of bigger problems, as a warped cylinder head is often what causes the gasket to fail in the first place. That’s why it’s best to just remove the head and ...

It was likely intended to reduce the amount of material ... can prevent the gasket from properly sealing. The identical procedure was performed on the opposite cylinder head and both were allowed ...

The cylinder head gasket provides a seal between the engine block and the head that caps the cylinders. The gasket not only contains the pressure of controlled explosions within the cylinders but ...

A head gasket is a crucial component of your vehicle's engine, sealing the engine block and cylinder head to prevent coolant and oil from mixing. When a head gasket fails, it can cause various ...

The first document, shown above, is addressed to Ford dealers, and describes the issue, stating: In some of the affected vehicles, the cylinder head gasket may develop a coolant leak into the ...

CARS.COM — Your car’s head gasket is an important part of the engine. It seals the cylinder head to the engine block. The cylinder head houses the engine valves while the engine block contains ...

As a vehicle's engine operates, the intake and exhaust valves open and close rapidly while the pistons move up and down in the cylinder. These mechanical actions require a constant supply of hot oil ...